HVLS fan to install on the market. INSTALLATION INFO: If you cannot install the NORDICCO Fan using only the Standard Swivel mount, then you ® can utilize one of the additional mounting options, as described in this manual.
To reduce the risk of fire, electric shock, or injury to persons, observe the following: Use this unit only in the manner intended by the manufacturer. If you have questions, contact Nordicco or its representative. Before servicing or cleaning the unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally.
Mounting brackets - i & H steel beams REQUIRED TOOLS 13 MM 13 MM SOCKET LIFT OR WRENCH WRENCH SOCKET WRENCH SCAFFOLDING WHAT'S IN THE BOX 2 pcs. M8x70 mm. bolts Mounting brackets for steel beams 2 pcs. M8 locknuts INSTALLATION PROCESS Place the brackets on each side of the steel beam and push the bolts through the 2...
Mounting brackets - wood & concrete beams REQUIRED TOOLS 13 MM 5 MM 13 MM LIFT OR SOCKET DRILL WRENCH ALLEN KEY SCAFFOLDING WRENCH SOCKET WRENCH WHAT'S IN THE BOX Angle brackets Steel plate BOLTS BOLTS FOR CONCRETE SCREWS FOR SADDLE MOUNT SCREWS FOR WOOD BOLTS FOR STEEL PLATE 12 pcs.
Stabilising wire set REQUIRED TOOLS 8 & 13 MM 8 & 13 MM SOCKET WRENCH WRENCH SOCKET WRENCH WHAT'S IN THE BOX Wire turnbuckles Wire clamps Snap hooks Eye hooks and plugs for concrete Mouting plate and M10x70 bolt with locknut Steel wire, 20 meter INSTALLATION PROCESS Push the opposite end of the steel wire...
Page 8
Other manuals, such as Advanced User Guides for setting up fan networking mode and integrating fans to a building management system - as well as manuals in other languages can be downloaded from our website: www.nordicco.eu/downloads Address contact Nordicco A/S...