Lifting The Robot Without Lifting Accessories - ABB IRB 14000 Product Manual

2.3.2 Lifting the robot without lifting accessories

General
This section describes how to lift the robot and move it manually.
Persons required for lifting robot
Attachment screws and pins
All hardware is enclosed in the robot delivery.
Suitable screws
Quantity
Quality
Washer
Guide pins
Tightening torque
Level surface requirements
Lifting and transporting the robot
Use this procedure to lift the robot.
1
2
Product manual - IRB 14000
3HAC052983-001 Revision: P
Action
CAUTION
The IRB 14000 robot weighs 38 kg and can be
lifted by two persons.
Grasp the hand-holding grooves, one person
on each side of the robot.
© Copyright 2015 - 2021 ABB. All rights reserved.
2 Installation and commissioning
2.3.2 Lifting the robot without lifting accessories
Amount Note
2
M5x25
8 pcs
8.8
8 pcs, 5.3x10x1
2 pcs, article number 3HNP00449-1
3.8 Nm ± 0.38 Nm
xx1500000627
Note
xx1400002122
0.1
Continues on next page
65