Associating To The Printer - Brother HL-2700CN Network User's Manual

8
Click the OK button. When prompted you must re-boot your
computer.

Associating to the Printer

You must now create a printer on your Windows
standard Windows
1
To do this, go the Start button, select Settings and then
Printers.
2
Select Add Printer to begin the printer installation.
3
Click Next when you get the Add Printer Wizard window.
4
Select Local Printer when you are asked how the printers are
connected to your computer, and then click Next.
5
Select the correct driver. Click Next when you are done.
6
If you have selected a printer driver that is already being used,
you have the option of either keeping the existing driver
(recommended) or replacing it. Select the desired option and
click Next.
7
Select the Brother LPR port (the port name you assigned in step
6 of the "Installing the Brother Peer to Peer Software" section)
and click Next.
8
Enter any desired name for the Brother printer and click Next.
For example, you could call the printer "Networked Brother
Printer".
®
9
Windows
select Yes and then select Finish.
You have now finished installing the Peer to Peer Print (LPR) software.
®
printer setup procedure.
will now ask you if you wish to print out a test page,
®
system using the
PEER TO PEER PRINTING 3 - 4