GEM DG-2000 Series Operation Manual page 8

GEM
DG-2000 Series Standalone PROX Reader Controller Operation Manual
__________________________________________________________________________
4. Setup Parameters
Operation Flow for Setting up DG-2000 Series Standalone PROX Reader Controller
Start
Setup system basic
parameters
Setup time interval
function
(optional)
Add Master card/
User card and door
access PIN
Finish
_______________________________________________________________________________________________________________
Version 1. 05-22-2015
Make sure all cables are in correct connection before power on
Setup system basic parameters:
Enter the program mode
Reset to factory setting
Change master password
Change door common access password
Setup operation mode
Setup current time
Setup Electrified lock release time
Setup time interval function (option):
Setup time interval for No password entry needed
Setup electrified lock release time interval function
Setup time interval for alarm disabled function
Enable time interval for No password entry needed function (option)
Enable electrified lock release time interval function (option)
Enable time interval for alarm disabled function (option)
Enable door ajar funciton
Enable alarm function
Add master card / user card and door access PIN
Add master card for backup (max. 5 cards)
Add user card (max. 2000 cards)
Add door access PIN (max. 200 PINs)
Operation Begins
Gianni Industries, Inc. Page 8 of 17