GEM DG-2000 Series Operation Manual page 10

GEM
DG-2000 Series Standalone PROX Reader Controller Operation Manual
__________________________________________________________________________
Setting Time interval of NO Password Entry Needed
During the time period, no password entry needed
Setting time interval (1):
＊ ＊ 84 From HHMM # To HHMM #
Press:
Setting time interval (2) :
＊ ＊ 85 From HHMM # To HHMM #
Press:
Setting Time interval of Electrified Lock Released
During the time period, electrified lock is released
Setting time interval (1):
＊ ＊ 86 From HHMM # To HHMM #
Press:
Setting time interval (2):
＊ ＊ 87 From HHMM # To HHMM #
Press:
NOTE: Please remember to disable this function before weekend and holiday.
Setting Time Interval For Disabling Alarm
During this period, alarm output is not available
Setting time interval (1):
＊ ＊ 88 From HHMM # To HHMM #
Press:
Setting time interval (2):
＊ ＊ 89 From HHMM # To HHMM #
Press:
Enable Time Interval Function of NO Password Entry Needed (Option)
＊ ＊ 34 #
Enable – Press:
44#
Disable – Press:
Enable Time Interval Function of Electrified Lock Released (Option)
＊ ＊ 35 #
Enable – Press:
45#
Disable – Press:
Enable Time Interval Function of Disabling Alarm (Option)
＊ ＊ 36 #
Enable – Press:
46#
Disable – Press:
Enable Door Ajar Function
＊ ＊ 32
Enable – Press:
every 2 seconds continuously until door closed properly.
42#
Disable – Press:
Enable Alarm Function
＊ ＊ 33#
Enable – Press:
＊ ＊ 43#
Disable – Press:
Use valid card + Door Access PIN to reset alarm (if a Door Access PIN entry is required)
_______________________________________________________________________________________________________________
Version 1. 05-22-2015
Enable the function
(Default Setting)
Enable the function
(Default Setting)
Enable the function
(Default Setting)
Door Ajar Time (00s to 60s)
(Default Setting)
(Default Setting)
Gianni Industries, Inc.
#
. If door ajar time expires, beeper will beep
Page 10 of 17