Table of Contents
Advertisement
GEM
DG-2000 Series Standalone PROX Reader Controller Operation Manual
__________________________________________________________________________
5.
Adding Card and Door Access PIN
Please prepare a card number list before adding / deleting a card information.
Add Master Card
＊ ＊ 10
Press:
(use master card)
NOTE: If continue adding a master card, no need to press
#
Press:
to return to program mode and hear 2 beeps, then press
Add User Card
＊ ＊ 11
Press:
Location ID
'1' to '2000')
NOTE:
If continue adding a user card, no need to press
card) or enter 10 digits card number and
If the location ID has cardholder record, the reader will get 4 beeps, continue or return to program
#
mode by press
#
Press:
to return to program mode and hear 2 beeps, press
Add Door Access PIN
＊ ＊ 12
Press:
Location ID
'2001' to '2200')
NOTE: If continue adding a door access PIN, no need to press
Door Access PIN
#
Press:
to return to program mode and hear 2 beeps, press
_______________________________________________________________________________________________________________
Version 1. 05-22-2015
#
#
(use user card) or enter 10-digit card number and # (Location ID is from
#
#
Door Access PIN
#
#.
Door Access PIN
Gianni Industries, Inc.
＊10
again.
＊＊#
＊11
again, only enter Location ID
＊ ＊ ＊ ＊ #
again to exit the program mode.
#
#
Door Access PIN
. (Location ID is from
＊12
again, only enter Location ID
＊＊#
＊＊
again to exit the program mode.
again to exit the program mode.
#
(use user
Page 11 of 17
#
Advertisement
Table of Contents
