GEM DG-2000 Series Operation Manual page 12

GEM
DG-2000 Series Standalone PROX Reader Controller Operation Manual
__________________________________________________________________________
6. Deleting Card and Door Access PIN
Delete Master Card
＊ ＊ 20
Press: (use master card)
NOTE: If continue deleting a master card, no need to press
#
and press
#
Press: to return to program mode and hear 2 beeps, press
Delete User Card
＊ ＊ 21
Press: (use user card) or enter 10-digit card number and
NOTE: If continue deleting a user card, no need to press
key in 10-digit card number and
#
Press: to return to program mode and hear 2 beeps, press
mode.
Delete Door Access PIN
＊ ＊ 22
Press: Door Access PIN
NOTE : If continue deleting a user card, no need to press
#
PIN Door Access PIN
#
Press: to return to program mode and hear 2 beeps, press
mode.
Empty Location ID
＊ ＊ 23
Press: Location ID
(Location ID is from '1' to '2200')
NOTE : If continue erasing Location ID contents, no need to press
#
ID Location ID
#
Press: to return to program mode and hear 2 beeps, press
Delete all Master Cards
＊ ＊ 27#27#
Press:
Delete all User Cards
＊ ＊ 28#28#
Press:
Delete all Door Access PINs
＊ ＊ 29#29#
Press:
_______________________________________________________________________________________________________________
Version 1. 05-22-2015
#
#
.
#
Door Access PIN
#
.
# #
Location ID .
#
.
Gianni Industries, Inc.
＊20
again, only (use master card)
＊＊# ＊＊
again to exit the program mode.
#
.
＊21
again, only (use user card) or
＊＊ ＊＊#
again to exit the program
#
.
＊22
again, only enter Door Access
＊＊ ＊＊#
again to exit the program
＊ ＊ 23
again, only enter Location
＊＊ ＊＊#
again to exit the program mode.
Page 12 of 17