Setting Up The Printer For Windows - Brother HL-1060 Series User Manual

USER'S GUIDE

Setting Up the Printer for Windows

Question
I cannot print from my
application software.
Sometimes I get a Print Overrun
error when printing certain
documents from Windows.
Sometimes I get the Memory
Full message. How can I correct
this?
CHAPTER 6 –10
Recommendation
Make sure the supplied Windows printer driver is
installed and selected with your application
software.
If you use the serial interface, make sure that the
serial slide switch of the serial interface is in the
correct position and the interface settings are
correctly set up with the DIP switches.
Change the following settings in the driver and try
again.
Page Protection
Graphics Mode
TrueType™ Mode
Use Printer TrueType™ Fonts
Reduce the print resolution or reduce the
complexity of your document and try again.
Expand the printer memory by installing SIMM
and turn page protection A4, Letter or Legal to ON
through the supplied Windows driver or RPC.
Change the following settings in the driver and try
again.
Page Protection
Graphics Mode
TrueType™ Mode
Use Printer TrueType™ Fonts
Another solution is to purchase more memory.
Reduce the print resolution or reduce the
complexity of your document and try again.