Lamps And Switch - Brother HL-1040 Quick Setup Manual

LAMPS AND SWITCH

This section refers to the following lamps and switch on the printer control panel.
Note
When the power switch is off or the printer is in sleep mode, all lamps including the Ready
lamp are off.
Ready (Paper) Lamp
The Ready lamp indicates the current status of the printer.
Lamp Printer status
The power switch is off or the printer is in sleep mode. If the printer is
Off
in sleep mode, it will wake up automatically when it receives data or
you press the control panel switch.
The printer is warming up. (Blinking at 1 second intervals)
Blinking
The printer is cooling down and has stopped printing until the printers
Blinking
internal temperature lowers. (Blinking at 2 seconds intervals)
The printer is ready to print.
On
This lamp also works as the Paper lamp with the Alarm lamp. They blink
simultaneously to indicate a paper error.
Data (Toner) Lamp
The Data lamp indicates the current status of the print data process.
Lamp Printer status
The printer has no print data.
Off
The printer is receiving data from the computer or the printer is
Blinking
processing data in memory.
Print data remains in the printer memory. If the Data lamp is on for a
On
long period of time and nothing has printed, you need to press the
switch to print the remaining data.
This lamp also works as the Toner lamp with the Alarm lamp. They blink
simultaneously to indicate a toner error.
CARTRIDGE" and "Operator Calls" section in this manual.
See "Operator Calls" section of this manual.
See "REPLACING THE TONER
-21 -