Brother HL-1040 Quick Setup Manual page 27

High Temperature
2
3
4
Warning
After you have just used the printer,
some internal parts of the printer are
extremely hot. When you open the top
cover of the printer, never touch the
shaded parts shown in the following
illustration.
Gently turn the lever on the toner cartridge
forward until it stops.
Note
The toner cartridge cannot be removed
unless the shutter is completely closed by
turning the lever fully to the front.
Remove the old toner cartridge from the
drum unit by pulling it out gently.
!
Caution
Handle the toner cartridge carefully. If toner
scatters on your hands or clothes, wipe or
wash it off with cold water immediately.
Unpack the new toner cartridge, gently
shake it five or six times and then remove
the protective part.
!
Caution
Only unpack the toner cartridge
immediately before installing it into the
printer. If toner cartridges are left
unpacked for a long period of time, the
toner life is shortened.
You can only use a Brother genuine
toner cartridge (TN-300 series) which
is specially formulated to ensure top
print quality. Using another brand of
toner cartridge could void your
printer's warranty.
-25 -