Brother HL-1040 Quick Setup Manual page 11

4
5
6
When the installation of the USB driver is complete, install the printer driver.
From CD-ROM:
From Floppy disk:
Set the printer port to USB
After installing the USB driver and printer driver, the printer port has to be set to 'USB port'.
1. Click the Start button and select Printers in Settings.
2. Select the HL-1050 icon in printers so that the HL-1050 icon is highlighted.
3. Select Properties from File menu.
4. Click Details tab.
5. Select BRUSB:(USB Printer Port) in the box for "Print to the following port".
6. Click OK to close the properties dialog box.
9
Insert the supplied CD-ROM into the
drive of your PC.
Select "CD-ROM drive."
Click the Next button
Click the Next button.
The USB driver is installed.
When the dialog shown above appears on
your PC, click the Finish button.
Be sure to restart Windows 98 so that
the installed USB driver will be
effective.
Run the CD-ROM program and go to the 'Install driver' menu.
Refer to the Software Quick Setup Guide.