Faxing From The Scanner Glass - Brother MFC-9800 Owner's Manual

Faxing from the Scanner Glass

You can use the scanner glass to fax one page at a time or pages of a book.
Originals can be Letter or A4 size (8.5 inches to 11.7 inches).
To use the scanner glass, the ADF must be empty.
1
Lift the document cover.
2
Using the document guidelines on the left, center the original face down on the
scanner glass.
3
Close the document cover.
If the original is a book or is thick, do not slam down the cover or press on it.
4
Dial the fax number, then press Fax Start. The MFC starts scanning the first
page.
5
To send a single page, go to Step 7
—OR—
To send multiple pages, go to Step 6.
6
Place the next page on the scanner glass, and then press Set. The MFC starts
scanning. (Repeat Step 6 for each additional page.)
7
Press Fax Start to begin dialing.
Press Stop/Exit to cancel. If the original was scanned into memory, press 1 to
CLEAR it—OR—2 to EXIT.
If memory is full, and you are faxing a single page, it will be sent in real time.
You cannot fax from the scanner glass when the MFC is sending, receiving or
printing a fax.
Document
Cover
Originals are
Face Down
on the Scanner
Glass
S E T U P S E N D
6 - 3