Paper Type; Changing Default Copy Settings - Brother MFC-9800 Owner's Manual

Paper Type

You can use the following types of paper for copying. For the best print quality,
select the type of media that you are using.
THIN (16lb - 18.4lb)
PLAIN (18.7lb - 25.3lb)
THICK (25.6lb - 32lb)
THICKER (32.3lb - 43lb)
TRANSPARENCY
1
Press Options and
Set.
2
Press
or
3
Press Copy—OR—Press

Changing Default Copy Settings

Press Menu, 3 to change default settings for Copy mode. These settings will
remain until you change them again by pressing Menu. Adjust the Copy Mode
and Contrast settings.
By pressing a number, you can adjust copy settings as shown in the following
chart. Press
to save your selection. Press Stop/Exit. —OR—Press
setting you want to change.
Press Menu, and 3.
1.COPY MODE
2.CONTRAST
3.PAPER TYPE
11 - 8
M A K I N G C O P I E S
- For thin paper or transparency
- For ordinary plain paper
- For heavy weight paper or rough paper
- For heavier weight paper, rough paper or bond
paper.
- For transparency (OHP)
to select
or
to select your type of paper, and then press Set.
or
to scroll through the options for each setting. Press Set
or
AUTO
TEXT
PHOTO
-
THIN
PLAIN
THICK
THICKER
OPT:PAPER TYPE, and then press
for additional settings.
+
to select the next
is default