Getting Started; Carton Components - Brother MFC-8870DW Quick Setup Manual

Getting Started

1

Carton components

Carton components may vary from one country to another.
Save all packing materials and the carton in case for any reason you must ship your machine.
1 Automatic Document Feeder (ADF)
2 Control Panel
3 Face-down Output Tray Support Flap (Support Flap)
4 Front Cover
CD-ROMs
For Windows
For Macintosh
Drum and Toner Cartridge Unit
Assembly
The interface cable is not a standard accessory. Please purchase the appropriate interface cable for the interface
you intend to use (Parallel, USB or Network).
Do NOT connect the interface cable at this time. Connecting the interface cable is done during the software
installation process.
USB interface cable
Please make sure you use a USB 2.0 interface cable that is no longer than 2.0 meters.
When you use a USB cable, make sure you connect it to the USB port of your computer and not to a USB port
on a keyboard or non-powered USB hub.
Parallel interface cable
Please make sure you use a Parallel interface cable that is no longer than 2.0 meters.
Use a shielded interface cable that is IEEE 1284-compliant.
Network cable
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100Base-TX Fast Ethernet
Network.
2
1
2
3
4
5
®
®
Quick Setup Guide
AC Power Cord
5 Paper Tray
6 Power Switch
7 Document Cover
8 ADF Document Output Support Flap
Telephone line Cord
8
7
6
User's Guide