ESL Intensifier
Parts list information
The parts list section is provided to assist the user in or-
dering replacement parts. Whenever possible, the parts
list for complicated assemblies includes exploded view
illustrations, which can help the user see how it is
assembled.
Items that are available from local sources are usually
excluded from the parts lists. These include electrical
cable, electrical conduit fittings, hoses and hose fittings,
brass fittings, copper tubing, and fasteners.
Ordering parts
Refer to manual MS-2266, Customer Support.
Customer Service
Customer Service personnel are located at Flow's head-
quarters in Kent, Washington, USA. They provide parts
availability and price information, and are available by
phone, mail, and fax between 6:30 a.m. and 5:30 p.m.
Pacific time, Monday through Friday. Refer to manual
MS-2266 for complete information.
Technical Service
Technical Service personnel are available to answer
questions about installation, training, and equipment
service during normal business hours between 8:00
a.m. and 5:00 p.m Pacific Time., Monday through Fri-
day. During non-business hours, an answering service
will take messages. In an emergency, a service engineer
will contact you as soon as possible.
A service engineer can be made available for on-site tech-
nical assistance during installation, service, and training.
Contact Flow Technical Service for more information.
32 | M-310
© Flow International Corporation
Need help?
Do you have a question about the ESL INTENSIFIER and is the answer not in the manual?
Questions and answers
the red lights on side of sensors when pump is off only bottom two are illuminated
The bottom two red lights on the Flow ESL Intensifier sensors are illuminated when the pump is off because the system is not pressurized, and no hydraulic movement is occurring. These lights likely indicate a default or standby state when the pump is not actively generating high-pressure water.
This answer is automatically generated