Connections - Panasonic AK-HRP1015G Operating Manual

Remote operation panel for aw-ue70 series 4k integrated cameras or aw-he35/ aw-he38/aw-he40/aw-he70 series hd integrated cameras.

Hide thumbs Also See for AK-HRP1015G:

Table of Contents

Connections

Set the connection setting to [Serial(AW3)] or [LAN(AW3)] in the [CONNECT SETTING] menu.

NOTE

To connect with the AW-UE70/AW-HE35/AW-HE38/AW-HE40/AW-HE70, upgrade the system version of the unit to

2.00-00-0.00 or later.

When connecting, observe the following points.

Serial connection

Use a dedicated cable to connect the [CCU] connector of this unit to the [RS-422] connector of the AW-UE70/AW-

HE35/AW-HE38/AW-HE40/AW-HE70.

Use a PoE power supply for the power supply.

LAN connection

Connect the [LAN] connector on this unit to the [LAN ACT/LINK] connector on the AW-UE70/AW-HE35/AW-HE38/AW-

HE40/AW-HE70 using a LAN cable (sold separately).

Configure the camera IP address and port number settings of the connection destinations in [CAMERA IP SETTING] as

well.

This unit can be powered using PoE. Use a switching hub with PoE support.

Use a straight cable (category 5e or higher; up to 100 m (328.0 ft) in length) for the LAN cable (STP).

For details on switching hubs and PoE injectors that have been verified to support PoE, consult with your dealer.

Connecting the Unit to AW-UE70/AW-HE35/AW-HE38/AW-HE40/AW-HE70 Series Cameras

- 5 -

Table of Contents