Connections - Panasonic AK-HRP1005G Operating Manual

Connections

Set the connection settings to "LAN (AW6)" in the [CONNECT SETTING] menu.
When connecting, observe the following points.
Connect the <LAN> connector on this unit to the <LAN LINK/ACT> connector on the AW-UE80/AW-UE50/AW-UE40
using a LAN cable (sold separately).
Configure the camera IP address and port number settings of the connection destinations in [CAMERA IP SETTING] as
well.
This unit can be powered using PoE. Use a switching hub with PoE support.
Use a straight cable (category 5e or higher; up to 100 m (328.0 ft) in length) for the LAN cable (STP).
For details on switching hubs and PoE injectors that have been verified to support PoE, consult with your dealer.
Connecting the Unit to AW-UE80/AW-UE50/AW-UE40 Cameras
- 4 -