Electric pedestal/wall carbon fibre heater (15 pages)
Summary of Contents for Fanmaster IFH-5
Page 1
FA NM A ST E R cooling heating ventilation extraction INSTRUCTION MANUAL INDUSITRAL FAN HEATER ELECTRIC MODEL: IFH-5 FOR INDUSTRIAL USE ONLY TO PREVENT SERIOUS INJURY, READ & UNDERSTAND ALL WARNINGS & INSTRUCTIONS BEFORE USE. PLEASE KEEP THIS DOCUMENT FOR YOUR RECORDS...
FOR YOUR INFORMATION Thank you for purchasing a Fanmaster electric fan/space heater. Please read this instruction manual carefully before using this heater. Disclaimer: Fanmaster reserves the right to make alterations to specifications, quantities, dimensions, for production or other reasons, subsequent to publication.
Page 3
ALWAYS CHECK THE POWER CABLE BEFORE USING THE APPLIANCE. IT MUST NOT BE BENT, TAUT, STRETCHED, CRUSHED OR ANY WAY DAMAGED. • IF THE POWER CORD AND/OR PLUG IS DAMAGED, IT MUST BE REPLACED BY FANMASTER, A SERVICE AGENT OR A QUALIFIED PERSONS. •...
2. PRODUCT DESCRIPTION & SPECIFICATIONS PRODUCT DESCRIPTION Industrial electric space/fan heater. SPECIFICATIONS MODEL IFH-5 5 KW Heat Output 17,060 BTU Air Flow (L/s) 1 x Fan setting Control settings 2 x Heat settings Settings (KW) FAN/2.5/5 Voltage (V/Hz) 415/50 Plug...
3. GETTING TO KNOW YOUR HEATER Remove the heater from the carton. If the heater is damaged, please contact Fanmaster or where you purchased the heater from. 1. Manual Reset 2. Switch Knob 3. Thermostat Knob 4. Elements 5. Steel frame/feet...
Page 6
3. GETTING TO KNOW YOUR HEATER - CONTINUED CONTROL PANEL • Left Knob = switch control settings • Right Knob = thermostat control The rotary switch (left knob) has 3 settings & 4 positions: • • 1st Setting: FAN ONLY •...
15 minutes. • Do not attempt any electrical repair yourself. If the heater needs service or repair, contact Fanmaster or a qualified person. • When cleaning, make sure that water does not enter the unit. •...
8. TROUBLESHOOTING PROBLEM CAUSE SOLUTION The heater does not operate, even Disconnect the plug, check The plug is loose, bad when it is plugged the connection of the plug & connection in & the switch, socket. Try another socket thermostat are ON The input voltage is too high Check power supply or too low...
To make a claim under the warranty, take the product (with proof of purchase) to the store where you purchased the product or go to https://www.fanmaster.com.au/warranty-claims-returns. This warranty is given by Fanmaster Pty Ltd ABN: 45 353 934 457 Unit 1/6-8 Yalgar Rd, KIRRAWEE NSW 2232 P: 1300 900 345 E: warranties@fanmaster.com.au...
Page 12
FA NM A ST E R cooling heating ventilation extraction Fanmaster Pty Ltd | 1/6-8 Yalgar Road, KIRRAWEE NSW 2232 1300 900 345 | sales@fanmaster.com.au | www.fanmaster.com.au N11664 MADE IN CHINA...