FusionModule2000 Smart Modular Data Center
Maintenance Guide (Fusion Module Actuator)
Figure 5-20 Securing the VCN520
Step 4 Reconnect the cables to the new VCN520.
Step 5 Turn on the power switch of the VCN520.
Step 6 Commissioning the VCN520. If the video recording function works properly after
commissioning, the VCN520 is functional.
----End
5.4.2.4 Replacing a VCN540
Prerequisites
●
●
●
Context
Videos cannot be recorded during the replacement of the VCN540.
Do not operate with power on. Take appropriate insulation measures.
Issue 01 (2020-12-25)
Recommended tool: Phillips screwdriver
A VCN540 needs to be replaced.
A spare VCN540 of the same model is available and functional.
NO TICE
D ANGER
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
77