Making Copies; How To Copy; Entering Copy Mode; Making A Single Copy - Brother MFC-490CW User Manual

11

Making copies

How to copy

Entering Copy mode

When you want to make a copy, press
(Copy) to illuminate it in blue.
The LCD shows:
01
1
Quality
Enlarge/Reduce Enlarge/Reduce
Ratio: Ratio:
Paper Paper Type ype
COPY
1 No. of Copies
You can enter the number of copies you want
by using the dial pad.
Press a or b to scroll through the Copy key
options.
Quality (See page 79.)
Enlarge/Reduce (See page 80.)
Paper Type (See page 82.)
Paper Size (See page 83.)
Brightness (See page 82.)
Contrast (See page 82.)
Stack/Sort (See page 82.)
Page Layout (See page 80.)
Book Copy (See page 83.)
Watermark Copy (See page 84.)
Set New Default (See page 85.)
Factory Reset (See page 86.)
When the option you want is highlighted,
press OK.
78
11
11
Normal
100% 100%
Plain Paper Plain Paper
Copy Press Start
Note
• The default setting is Fax mode. You can
change the amount of time that the
machine stays in Copy mode after the last
copy operation. (See Mode Timer
on page 24.)
• Book Copy and Watermark Copy
features are supported by technology
from Reallusion, Inc.

Making a single copy

a
Press (Copy).
b
Load your document.
(See Loading documents on page 20.)
c
Press Black Start or Color Start.

Making multiple copies

You can make up to 99 copies.
a
Press (Copy).
b
Load your document.
(See Loading documents on page 20.)
c
Enter the number of copies you want.
d
Press Black Start or Color Start.
Note
To sort the copies, press a or b to choose
Stack/Sort. (See Sorting copies using
the ADF on page 82.)

Stop copying

To stop copying, press Stop/Exit.
11
11
11
11