Brother MFC-3320CN Quick Setup Manual page 11

Step A: Color Block Quality
Check
1
The LCD shows:
Is Step "A" OK?
1.Yes 2.No
Check the quality of the four color blocks
formed by the short lines printed on the
sheet.
(BLACK/CYAN/YELLOW/MAGENTA)
2
If all lines are clear and visible, press
on the dial pad to go to STEP B: Alignment
Check.
---OR---
If you can see missing short lines, press
on the dial pad and go to
OK
3
The LCD asks you if the print quality is OK
for each color. Press
dial pad.
Black OK?
1.Yes 2.No
When you have finished selecting
(YES) or
LCD shows:
Start Cleaning?
1.Yes 2.No
Press (YES), and then MFC starts
cleaning the colors.
After cleaning is finished, press
Color Start. The MFC starts printing the
PRINT QUALITY CHECK SHEET again
and goes back to the first step of STEP A.
3
.
Poor
or on the
(NO) for each color, the
Step B: Alignment Check
1
The LCD shows:
Is Step "B" OK?
1.Yes 2.No
Check the 600 dpi and 1200 dpi test print to
see if No.5 most closely matches the OK
sample (No.0). Press
it.
600 DPI
If another test print number is a better match
for either 600 dpi or 1200 dpi, press
select NO and go to
2
For 600 dpi, select the number from 1 to 8
that most closely matches the No.0 sample
and enter it using the dial pad.
Select Best #
3
For 1200 dpi, enter the number from 1 to 8
that most closely matches the No.0 sample.
Select Best #
The Quality check is now complete.
if No.5 matches
No.5
1200 DPI
to
2
.
9