For Windows 98/98Se/Me/2000 Professional/Xp - Brother MFC-3240C Quick Setup Manual

For Network Interface Cable Users (MFC-3340CN only)
®
(Windows 98/98SE/Me/2000 Professional/XP)
Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 4 - 11.
Before installation, if you are using Personal
Firewall software, disable it. Once you are
sure that you can print, re-start your
Personal Firewall software.
1
Connect the network cable to the machine,
and then connect it to a free port on your
hub.
To connect the network interface cable to
the machine:
1. Open the top cover to its open position.
2. Insert the network cable into the LAN
socket, marked with a
will find the LAN socket above and to the
left of the ink cartridge slots, as shown
below.
3. Carefully route the network cable
through the trench and out the back of
the machine as shown below.
Warning
Ensure that the cable does not restrict the cover from
closing, or an error may occur.
In case of using both USB and LAN cables,
route both cables through the trench.
2
3
symbol. You 4
5
6
Gently close the top cover.
Turn on the machine by plugging in the
power cord.
Turn on your computer.
®
(For Windows 2000 Professional/XP, you
must be logged on as the administrator.)
Insert the supplied CD-ROM into your
CD-ROM drive. If the model name screen
appears, select your machine. If the
language screen appears, select your
language.
The CD-ROM main menu will appear.
Click Install MFL-Pro Suite.
If this window does not appear, use
®
Windows Explorer to run the setup.exe
program from the root directory of the Brother
CD-ROM.
Continued...
17