ResMed CPAP S6 Clinician Manual page 22

USING A HUMIDIFIER
N
Set the pressure after connecting the humidifier.
OTE
i
If the patient is using a humidifier, then the Humidifier option must be set to ON.
1. Hold down the Start, 5 minute and 20 minute buttons while you turn on the
2. Press the 20 minute button to adjust the Humidifier setting. If the 20 minute
3. Press the Stop button to revert to normal operating mode, or turn the power
D
OWNLOADING COMPLIANCE DATA
The Elite model records up to 365 nights of patient compliance data that can be
downloaded. Please refer to your AutoScan software manual for details.
main power switch at the rear of the flow generator. Keep the buttons
pressed until the pressure display lights come on.
button is lit, then the Humidifier setting is ON. If the 20 minute button is not
lit, then the Humidifier setting is OFF.
off. If this is not done, the SmartStart/SmartStop function may not work
optimally.
17