Advertisement
Welded Sealskin
the Polytech deck and duratek hull are urethane. seams are
permanently sealed.
A patch kit is provided for deck, hull or sponson punctures.
the urethane glue will work for repairs to all of these fabrics.
for preparation and application, follow the instructions on the
adhesive container.
Sponsons
due to the tight fit of the skin, the sponsons are under
considerable pressure and some seepage of air may occur.
reinflate as necessary. After paddling on hot days, release air
from sponsons, especially if leaving the kayak beached in full
sun on a hot day.
To Repair/Replace Sponson
the sponsons can be removed from the sleeve sewn to the
inside of the skin. turn the skin inside out. the sponson
chamber is open at bow and stern ends. tie a long string
through the hole in the tab at each end of the sponson. Pull
sponson through the center opening of the chamber (where
sponson hose is attached). to reinstall, pull the cord attached
to the sponson back through the chamber. ensure sponson
is not twisted in the chamber.Inflate slightly to check fit.
urethane glue and patches are included in the repair kit.
duct tape will also work for the sponsons.
Feathercraft
kurrent
6
Advertisement
