6
InSTAll Keel exTenSIon BAR
•
Bow end has one band of black tape; stern end has two
bands of black tape. Connect to frame sections in skin.
•
Be sure the oversleeve on the extension bar is "open" and
the shockcord is visible. the shockcorded sections will be
"overlapped" along the keel.
•
Pull the tubes up towards you. Insert the bow side into the
pocket of the stern side, and push the tubes down to the
hull. slide oversleeve over join.
stern
Pull up. twist oversleeve
until "pocket" appears.
1
Push down
2
slide oversleeve to close
3
extension bar
keel bar
is overlapped
Bow
Feathercraft
kurrent
10