Troubleshooting; Overview; General Problems; Cd-Rom Is Inserted, But Does Not Start Automatically - Brother DCP-8065DN Network User's Manual

11

Troubleshooting

Overview

This chapter describes procedures for troubleshooting problems you may encounter with a Brother print
server, it is divided into the following sections:
■

General problems

■
Network print software installation problems
■
Printing problems
■
Protocol-specific troubleshooting
General problems

CD-ROM is inserted, but does not start automatically

If your computer does not support Autorun, the menu will not start automatically after inserting the CD-ROM.
In this case, execute setup.exe in the root directory of the CD-ROM.

How to reset the Brother print server to factory default

You can reset the print server back to its default factory settings (resetting all information such as the
password and IP address information). See Restoring the network settings to factory default on page 30.
11
77