Changing The Scan To Ftp Configuration Using A Browser; Changing The Ldap Configuration Using A Browser (Mfc-8860Dn Only) - Brother DCP-8065DN Network User's Manual

Web Based Management

Changing the Scan to FTP configuration using a Browser

You can configure and change following Scan to FTP settings using a web browser.
■
Profile name (Up to 15 characters)
■
Host Address (FTP server address)
■
Username
■
Password
■
Store Directory
■
Quality
■
File Type (PDF/JPEG/TIFF)
■
Passive mode (On/Off)
■
Port Number
Note
The details required to use Scan to FTP can be either be entered manually at the control panel or by using a
web browser to pre-configure and store the details in a FTP Profile. For more information see Network
Scanning in the Software Users Guide.

Changing the LDAP configuration using a Browser (MFC-8860DN only)

You can configure and change LDAP settings using a web browser.
■
LDAP Enable/Disable
■
LDAP Server Address
■
Port (The default port number is 389.)
■
Authentication
■
Username
■
Password
■
Search Root
■
Attribute of Name (Search Key)
■
Attribute of E-mail
■
Attribute of Fax Number
For more information on LDAP operation, see LDAP Operation (MFC-8860DN only) on page 57.
7
54