Printing The Network Configuration List - Brother DCP-8065DN Network User's Manual

Control Panel Setup
Note
You can reset the print server back to its default factory settings using the BRAdmin Professional utility,
BRAdmin Light utility or a web browser. For more information, see Using the BRAdmin Professional utility
and the TCP/IP protocol to configure your network printer (for Windows
Light utility to change the print server settings (for Mac OS

Printing the Network Configuration List

Note
Node Name: Node Name appears in the Network Configuration List. The default Node Name is
"BRN_xxxxxx" ("xxxxxx" is the last six digits of Ethernet address.).
The Network Configuration List prints a report listing all the current network configuration including the
network print server settings.
1
(For MFC-8460N, MFC-8660DN, MFC-8670DN and MFC-8860DN) Press Menu, 5, 6.
(For DCP-8065DN) Press Menu, 1, 8.
2
Press Start.
®
) on page 9 and Using the BRAdmin
®
X 10.2.4 or greater) on page 51.
3
31