Sauder Office Port 408293 Manual page 11

Step 7
Fasten the ENDS (A and B) to the BOTTOM (D).
å
Tighten four TWIST-LOCK® FASTENERS.
Notched edge
Dowel end
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
www.sauder.com/services
B
D
® FASTENER
Notched edge
408293
Edge with
TWIST-LOCK®
FASTENERS
A
Page 11