Page 1
Pogo Collection | 417675 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Prefer the phone? Call 1-800-523-3987. English pg 1-18 Français pg 19-21...
Page 2
Assembly Tools Required Part Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identifi cation Assembly Steps 5-18 Hammer Not actual size Français 19-21 Español 22-24 Skip the power trip. Safety 25-26 This time. Warranty Page 2 417675 www.sauder.com/services...
BOTTOM (1) RAIL (1) D178 SMALL DRAWER BACK (1) BACK (1) DRAWER BRACE (3) D704 DRAWER BOTTOM (3) FRONT PANEL (1) SMALL RIGHT DRAWER SIDE (1) DRAWER FRONT (2) SMALL LEFT DRAWER SIDE (1) D178 D704 D704 www.sauder.com/services 417675 Page 3...
BROWN 7/16" LARGE HEAD SCREW - 11 BROWN 1-1/2" FLAT HEAD SCREW - 3 30S BLACK 1-9/16" FLAT HEAD SCREW - 15 SILVER 3/4" MACHINE SCREW - 6 SILVER 3/8" MACHINE SCREW - 2 GOLD 1" MACHINE SCREW - 6 Page 4 417675 www.sauder.com/services...
Page 5
Look for this icon. It means a Step 1 video assembly tip is available at www.sauder.com/services/tips Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. Push eleven HIDDEN CAMS (1F) into the ENDS (A and B), å...
Page 6
ENDS (A and B). Use twelve GOLD 5/16" FLAT HEAD Remember: SCREWS (3S) through holes #1 and #3. Righty tighty. Lefty loosey. *patent pending glide system å Glide end Curved edge Glide end Curved edge GOLD 5/16" FLAT HEAD SCREW (12 used in this step) Page 6 417675 www.sauder.com/services...
Page 7
Tighten Risk of damage or Arrow injury. HIDDEN CAMS must be completely Arrow Maximum tightened. HIDDEN 210 degrees CAMS that are not completely tightened may loosen, and parts may separate. To Minimum completely tighten: 190 degrees www.sauder.com/services 417675 Page 7...
Page 8
Fasten the BOTTOM (D) to the RIGHT END (A). Tighten å two HIDDEN CAMS. Maximum Arrow 210 degrees Minimum 190 degrees This hole must be here. i t h f a c S u r D E N H I D Page 8 417675 www.sauder.com/services...
Page 9
NOTE: Be sure the WOOD DOWELS in the FRONT PANEL (F) å insert into the holes in the LEFT END (B). Curved edge S u r f a c H I D D E N i t h o www.sauder.com/services 417675 Page 9...
Page 10
HEAD SCREWS (6S). Fasten the TOP MOLDING (J) to the TOP (C). Use three å BROWN 1-1/2" FLAT HEAD SCREWS (14S). Surface with more holes Curved edge BROWN 1-1/2" FLAT HEAD SCREW (3 used in this step) Page 10 417675 www.sauder.com/services...
Page 11
Fasten the SKIRT (I) to the ENDS (A and B) and BOTTOM (D). å Use three BROWN 7/16" LARGE HEAD SCREWS (6S) through the BRACKETS and into the SKIRT. BROWN 7/16" LARGE HEAD SCREW (6 used in this step) Curved edge www.sauder.com/services 417675 Page 11...
Page 12
Push on opposite corners of your unit if needed to make it "square". Fasten the BACK (E) to your unit using the NAILS (1N). å This hole NAIL must be here. (36 used in this step) Page 12 417675 www.sauder.com/services...
Fasten the DRAWER BRACE (L) to the DRAWER å Repeat this step for the other DRAWERS. The small drawer will FRONT (G). Tighten one HIDDEN CAM. å use SMALL DRAWER FRONT (H), SMALL DRAWER SIDES (D16 and D17), and SMALL DRAWER BACK (D178). www.sauder.com/services 417675 Page 13...
Page 14
å Glide end Screw head - turn CAM to line up holes in the SLIDES with holes in DRAWER SIDES Glide end (4 screws per drawer) GOLD 5/16" FLAT HEAD SCREW (12 used in this step) Page 14 417675 www.sauder.com/services...
Page 15
Repeat this step for the other drawers. å If fastening the KNOBS (24K) to your drawers, use these SCREWS. GOLD 1" MACHINE SCREW (6 used for the KNOBS) SILVER 3/4" MACHINE SCREW (6 used for the CLEAR KNOBS) 107K www.sauder.com/services 417675 Page 15...
Page 16
å Separate the CARDS on the CARD SHEET (40M) and insert one into the CARD HOLDER. å BROWN 7/16" LARGE HEAD SCREW (1 used in this step) SILVER 3/8" MACHINE SCREW (2 used in this step) Page 16 417675 www.sauder.com/services...
Page 17
-Never open more than one drawer at a time. -If equipped with a drawer interlock system, do not defeat or remove it. Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over. D704 20 lbs. 30 lbs. each 40 lbs. www.sauder.com/services 417675 Page 17...
Page 18
#2. The higher the screw in the oblong hole, the higher your drawer front will be. The lower the screw, the lower the drawer front. Page 18 417675 www.sauder.com/services...
EXTRÉMITÉ DROITE ..........1 35AA GLISSIÈRE D'ÉLÉMENT UNIVERSELLE..6 pour future référence. EXTRÉMITÉ GAUCHE ..........1 35AC TIROIR DROIT ..............3 Pour contacter Sauder DESSUS ................1 35AD TIROIR GAUCHE ............3 en ce qui concerne cet DESSOUS ................1 10A EXCENTRIQUE DE COULISSE ......6 élément, faire référence...
Page 20
PLATE 40 mm NOIRES (30S). (30S). Répéter cette étape pour les autres TIROIRS. Le petit tiroir utilisera le DEVANT DE PETIT TIROIR (H), les CÔTÉS DE PETIT TIROIR (D16 et D17) et l'ARRIÈRE DE PETIT TIROIR (D178). Page 20 417675 www.sauder.com/services...
Page 21
à travers. 4. Faire tourner la vis jusqu’à ce qu’elle soit à fl eur du mur et qu'une résistance ferme se fasse sentir. 5. Continuer de tourner jusqu’à ce que la vis commence à pivoter librement. www.sauder.com/services 417675 Page 21...
EXTREMO IZQUIERDO ..........1 SOPORTE DE METAL ..........5 pour future référence. PANEL SUPERIOR ............1 24K PERILLA ................6 Pour contacter Sauder FONDO .................1 107K PERILLA TRANSPARENTE ........6 en ce qui concerne cet DORSO .................1 ETIQUETA DE ADVERTENCIA ......1 élément, faire référence...
Page 23
NEGROS DE CABEZA PERDIDA de 40 mm (30S). Repita este paso para los otros CAJONES. El cajón pequeño utilizara la CARA DE CAJÓN PEQUEÑO (H), los LADOS DE CAJÓN PEQUEÑO (D16 y D17) y el DORSO DE CAJÓN PEQUEÑO (D178). www.sauder.com/services 417675 Page 23...
CORREA DE SEGURIDAD (60M) a través de este agujero, luego use un TORNILLO MARRÓN DE CABEZA GRANDE de 11 mm (6S) a través de la CORREA DE SEGURIDAD y en el agujero pre- perforado en el fondo del PANEL SUPERIOR. Page 24 417675 www.sauder.com/services...
Page 25
• Ne pas pousser le mobilier, surtout sur la être très lourd. moquette. Se faire aider par une autre personne pour soulever l’élément et le mettre en place. • Cette unité doit être placée contre un mur. www.sauder.com/services 417675 Page 25...
Page 26
• No empuje la unidad, especialmente sobre ser muy pesado. un piso alfombrado. Pide la ayuda de otra persona para levantar la unidad y colocarla en lugar. • Esta unidad debe ser colocada contra una pared. Page 26 417675 www.sauder.com/services...
GARANTIE LIMITÉE DE 5 ANS 1. Sauder Woodworking Co. (Sauder®) off re une couverture de garantie limitée à l’ a cheteur 4. La présente garantie ne s’ a pplique qu’ a ux défauts garantis qui se produisent pour initial du présent produit pendant une période de cinq ans à...
Page 28
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built. If you Nice.
Need help?
Do you have a question about the Pogo 417675 and is the answer not in the manual?
Questions and answers