Brother DCP-750CW Network User's Manual page 84

f
Press a or b to select Change.
Press OK.
g
Enter the DNS Server address.
Press OK.
Note
For DCP models, press a or b repeatedly to enter the first three-digit number for the DNS Server address.
Press c to enter the second three-digit number. Repeat this step until you have entered the fourth three-
digit number to complete the DNS Server address. Press OK.
h
Press Stop/Exit.
Primary DNS Server IP Address
This field specifies the IP address of the primary DNS (Domain Name Service) server.
Secondary DNS Server IP Address
This field specifies the IP address of the secondary DNS server. It is used as a backup to the Primary DNS
server address. If the Primary server is unavailable, the machine will contact the Secondary DNS server.
APIPA
The setting of On will cause the print server to automatically allocate a Link-Local IP address in the range
(169.254.1.0 - 169.254.254.255) when the print server cannot obtain an IP address through the BOOT
Method you have set (see BOOT Method on page 70). Selecting Off means the IP address doesn't change,
when the print server cannot obtain an IP address through the BOOT Method you have set.
a
Press Menu.
b
Press a or b to select LAN.
Press OK.
c
(For Wired) Press a or b to select TCP/IP(Wired).
(For Wireless) Press a or b to select TCP/IP(WLAN).
Press OK.
d
Press a or b to select APIPA.
Press OK.
e
Press a or b to select On or Off.
Press OK.
f
Press Stop/Exit.
Control panel setup
6
6
6
6
77