Brother DCP-750CW Network User's Manual page 52
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for DCP-750CW:
- User manual (113 pages) ,
- Quick setup manual (51 pages) ,
- Service manual (383 pages)
Table of Contents
Advertisement
k
To communicate with the un-configured wireless machine, temporarily change the wireless settings on
your PC to match machine's default settings shown on this screen. ClickNext.
Note
• If a message to restart your PC appears after the wireless settings have been changed, restart your PC
and then go back to step 4 and continue with the install skipping steps 9, 10 and 11.
• For Windows® XP SP2 usersYou can temporarily change the wireless settings on your PC, following the
steps below:
1
Click Start and then Control Panel.
2
Click Network Connections icon.
3
Select and right click Wireless Network Connection. Click View Available Wireless Networks.
4
You can see the Brother wireless machine in the list. Select SETUP and click Connect.
5
Check the Wireless Network Connection status. It may take a few minutes to change from 0.0.0.0.
to 169.254.x.x IP address to be shown on screen (where x.x. are numbers between 1 and 254).
Wireless Configuration for Windows
®
4
45
Advertisement
Table of Contents
Troubleshooting
