Brother DCP-750CW Network User's Manual page 40

Note
The Default Node name of the NC-xxxx (where "xxxx" is your model name) is "BRW_xxxxxx" (where
"xxxxxx" is the last six digits of Ethernet address).
o
The wizard will search for wireless networks available from your machine. Choose the access point you
wish to associate the machine with, and then click Next.
Note
• If your access point is set to not broadcast the SSID you can manually add it by clicking the Add button.
Follow the on-screen instructions for entering the Name (SSID) and the Channel number.
• If the list is blank, check that the access point has power and is broadcasting the SSID, and then see if the
machine and the access point are within range for wireless communication. Then, click Refresh.
• "SETUP" is the default SSID of the machine. Do not choose this SSID.
Wireless Configuration for Windows
®
4
33