Brother DCP-750CW Network User's Manual page 62

Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server

Hide thumbs Also See for DCP-750CW:

Table of Contents

The following list appears. If the list is blank, check if the access point and the machine are powered on,

and then click Refresh. Choose the machine you wish to configure, and click Next.

Note

The Default Node name of the NC-xxxx (where "xxxx" is your model name) is "BRW_xxxxxx" (where

"xxxxxx" is the last six digits of Ethernet address).

The wizard will search for wireless networks available from your machine. Choose the access point you

wish to associate the machine with, and then click Next.

Wireless Configuration for Macintosh

Table of Contents

Troubleshooting

Multi-protocol on-board print server Nc-130h