Table of Contents
Advertisement
2)
Purpose of use
Equipped with main unit, suction bottle, suction tubes, hand piece and
power cable. User can easily adjust the levels of solution flow rate
(LOW (-) to HIGH (+)) depending on desired flow quantity.
prevent the reverse/over flow of contents in the suction bottle,
AquaGlo Plus adopts Anti-reverse flow sensor.
8.
Operation and Use of Systems
1)
Preparation
•
•
•
•
- Temperature: -15~50 C
- Humidity: 10~95%
Install power cord and connect to power source (it is
recommended that a surge protector be used).
After unit is plugged in, turn on the main power switch located on
the back of the unit above the hand set hose.
Refill the liquid bottle if necessary.
Connect the suction bottle. Make sure bottle is properly installed
on the unit. Ensure the suction bottle cover is sealed correctly.
Make sure the bottle has sufficient space to collect waste. To
install, see picture and instruction below:
7
To
Advertisement
Table of Contents
