Download
Share
Print this page
  1. Manuals
  2. Brands
  3. CFM Manuals
  4. Grill
  5. GP400 PINNACLE Series
  6. Quick start manual

CFM GP400 PINNACLE Series Quick Start Manual

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Step 1: Unpack carton
Tools Required: Knife or scissors; hammer; Philips or Robertson screwdriver
B o x
# 1
Use the knife or scissors to cut the strapping on the package, then lift off the cardboard cap.
Remove the cardboard sleeve by lifting it straight over top of the barbecue. Remove and unpack
the enclosed parts boxes. Carefully remove any protective covering from stainless steel parts.
CAUTION: Some exposed edges may be sharp.
Pinnacle
Pinnacle
GP400 PINNACLE SERIES GRILLS
B o x
B o x
B o x
# 2
Page 1
GP400 ASSEMBLY
# 5
B o x
# 4
# 3
50001766 03/03 Rev.0 En

Advertisement

loading

Related Manuals for CFM GP400 PINNACLE Series

Summary of Contents for CFM GP400 PINNACLE Series

  • Page 1 GP400 ASSEMBLY Pinnacle Pinnacle GP400 PINNACLE SERIES GRILLS Step 1: Unpack carton Tools Required: Knife or scissors; hammer; Philips or Robertson screwdriver B o x B o x B o x B o x B o x Use the knife or scissors to cut the strapping on the package, then lift off the cardboard cap.
  • Page 2 GP400 ASSEMBLY Step 2: Position main grill head. Required: Main Grill Unit. Carefully lay the main grill unit on its back, using the flattened carton cap as a protective surface. This operation is best performed by two (2) people. Use of gloves is recommended. Ensure the front lid does not fall open while moving the unit.

  • Page 3: Step 5: Assemble Casters

    GP400 ASSEMBLY Step 4: Assemble Legs to Grill Unit Required: (8) -20 x 1 ” bolts Position the leg assembly into the base unit until the two round bolt holes align with the thread inserts in the legs, as shown. Ensure the tank hole (on LP models) is at the right hand end of the grill.
  • Page 4 GP400 ASSEMBLY Step 7: Install Grease Cup, Cup Holder, and Pan. Required: Grease pan, grease cup and grease cup holder Assemble the cup holder into grease pan opening by squeezing the ends in slightly, then releasing. Place a grease cup into the holder, as shown in Fig.
  • Page 5 GP400 ASSEMBLY Step 9: Assemble side shelves. Required: (2) side shelves; (1) left and (1) right front shelf; (6) #10-24 x ” bolts; (2) #10 locknuts Hook the left and right front shelves over the corresponding front shelf supports, and push them toward the grill base.
  • Page 6 GP400 ASSEMBLY Step 10: Install Internal Components Sear Plates Warming Required: (3) sear plates, (2) cooking grates, Cooking Rack warming rack Grates Finger Hole Refer to Fig. 10. Place the sear plates into the base unit ensuring that edges with the finger holes face the grill front, and the side edges face down.
  • Page 7 GP400 ASSEMBLY GP400 Page 7...
  • Page 8 Valve, Side Burner – H – Propane 50001046 Valve, Side Burner – H – Natural 50001045 Wire Connector 33 S/B 50001668 * Varies by model CFM Harris Systems • 3501 W. Howard Street • Skokie, IL 60076-4012 USA • Phone: (800) 944-8982 • Fax: (847) 676-3759...