Gateway (And Router); Step By Step Chart - Brother Network User Manual

Gateway (and router)

A gateway is a network point that acts as an entrance to another network and sends data transmitted via the
network to an exact destination. The router knows where to direct data that arrives at the gateway. If a
destination is located on an external network, the router transmits data to the external network. If your network
communicates with other networks, you may need to configure the Gateway IP address. If you do not know
the Gateway IP address then contact your Network Administrator.

Step by step chart

a
Configure the TCP/IP settings.
Configure the IP address
Configure the subnet mask
Configure the gateway
b
Change the print server settings.
Using the BRAdmin Light utility
Using the BRAdmin Professional 3 utility
Using the control panel
Using the Web Based Management (web browser)
Using the Remote Setup
Using other methods
Configuring your machine for a network
See page 14
i
See page 14
i
See page 14
i
See page 17
i
See page 17
i
See page 18
i
See page 19
i
See page 19
i
See page 19
i
2
2
2
13