Load Documents; Using The Adf (Automatic Document Feeder) - Brother DCP120C - Flatbed Multifunction Photo Capture Center User Manual

Brother dcp-120c: users guide
Hide thumbs Also See for DCP120C - Flatbed Multifunction Photo Capture Center:
Table of Contents

Advertisement

Load documents

You can make copies and scan from the ADF (automatic document
feeder) or from the scanner glass.

Using the ADF (automatic document feeder)

The ADF can hold up to 10 pages and feeds each sheet individually.
Use standard [20 lb (80 g/m
before putting them in the ADF.
DO NOT use paper that is curled, wrinkled, folded, ripped,
stapled, paper clipped, pasted or taped.
DO NOT use cardboard, newspaper or fabric. (To copy or scan
this kind of document, see Using the scanner glass on page 1-7.)
Make sure documents written with ink are completely dry.
Documents must be from 5.8 to 8.5 inches (147 to 216 mm) wide
and 5.8 to 14 inches (147 to 356 mm) long.
2
)] paper and always fan the pages
INTRODUCTION 1 - 5

Advertisement

Table of Contents
loading

Table of Contents