Brother DCP120C - Flatbed Multifunction Photo Capture Center User Manual page 21

3
Stop/Exit
Stops an operation or exits from the
menu.
4
Black Start
Lets you start making copies in
black and white.
Also, lets you start a scanning
operation (in color or black,
depending on the scanning setting
in the ControlCenter software).
5
Color Start
Lets you start making copies in full
color.
Also, lets you start a scanning
operation (in color or black,
depending on the scanning setting
in the ControlCenter software).
6
On/Off
You can turn the machine on or off.
If you turn the machine off, it will still
periodically clean the print head to
maintain print quality.
7
Ink
Lets you clean the print head, check
the print quality, and check the
available ink volume.
8
Scan
Lets you access Scan mode.
See the Software User's Guide on
the CD-ROM.
9
PhotoCapture
Lets you access the PhotoCapture
™
Center .
0
Liquid Crystal Display (LCD)
Displays messages on the screen to
help you set up and use your
machine.
A
Warning LED
Turns red when the LCD displays an
error or an important status
message.
INTRODUCTION 1 - 3