Setting Up The Machine; Removing The Protective Parts; Loading Paper - Brother DCP-120C Quick Setup Manual

STEP1

Setting Up the Machine

1
1 Removing the protective
parts
1
Remove the protective tape and scanner glass
protection sheet.
Improper Setup
DO NOT connect the USB cable. Connecting
the USB cable is done during the software
installation process.
4
2

Loading paper

You can load up to 100 sheets of 20 lb
2
(80 g/m ) paper.
For details, see About paper in Chapter 1 of
the User's Guide.
1
Pull the paper tray completely out of the
machine and remove the output paper tray.
2
Press and slide the paper guide (1) to fit the
paper width.
1 1
3
Pull out the paper support (1) and unfold the
paper support flap (2).
Note
Use the paper support flap for Letter, Legal and A4
paper.
1
2