Battery Replacement - Technoline WT195 User Instructions

3 . Press ALARM key again until Minute digit flashes.and press UP or DOWN key to
change its value.
4 . Press ALARM key again to save and exit the setting, or let it exit automatically 30
seconds later without pressing any key.
USING ALARM AND SNOOZE FUNCTION
1. Slide ALARM ON/OFF switch to ON position to turn on the alarm, with the alarm
icon " " displayed on the LCD.
2. Slide ALARM ON/OFF switch to OFF position to turn off the alarm.
3. When it is sounding,press SNOOZE/LIGHT to stop the current alarm and enter the
snooze mode,with the alarm icon flashing. Or the sound will stop automatically one
minute later.
4. Once the snooze function is activated, the 4 step crescendo alarm will sound 5
times in 5-minute interval. The alarm duration is 60 seconds.

BATTERY REPLACEMENT

When the LCD becomes dim, replace with 2 new AA size batteries at once. Pay
attention to the battery polarity.
Environmental reception effects
The clock obtains the accurate time with wireless technology. Same as all wireless
devices, the reception is maybe affected by the following circumstances:
long transmitting distance

nearby mountains and valleys

near freeway, railway, airports, high voltage cable etc.

 near construction site
among tall buildings

inside concrete buildings

near electrical appliances (computers, TV's, etc) and metallic structures

inside moving vehicles

Place the clock at a location with optimal signal, i.e. close to a window and away from
metal surfaces or electrical appliances.
Precautions
This main unit is intended to be used only indoors.

Do not subject the unit to excessive force or shock.

Do not expose the unit to extreme temperatures, direct sunlight, dust or humidity.

Do not immerse in water.

Avoid contact with any corrosive materials.

Do not dispose this unit in a fire as it may explode.

Do not open the inner back case or tamper with any components of this unit.

Batteries safety warnings
 Use only alkaline batteries, not rechargeable batteries.
Install batteries correctly by matching the polarities (+/-).

Always replace a complete set of batteries.

Never mix used and new batteries.

GB 4