Table of Contents
Advertisement
received time. (Please refer also to notes on "DCF-77 Radio controlled Time" and "Manual
Time Setting").
BATTERY CHANGE:
It is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of
these units.
Please participate in the preservation of the environment. Return used batteries to
an authorised depot.
PROJECTION OF TIME AND/OR REMOTE TEMPERATURE
1.
When plugged into an AC outlet, the projection clock can continuously project the time and/or
remote temperature.
2.
When operating on batteries alone, the projection clock will only project when SNOOZE/LIGHT
button is pressed.
3.
The projection will auto-focus for display from three to six feet away. A dark surrounding will be
necessary to clearly see the projection.
4.
The default is projecting time (Hour and Minutes). The Projection Alarm can be set to project the
time (M0), remote temperature of Channel 1 (M1), or alternating between time and remote
temperature (M2) by pressing and releasing the "DISPLAY" button. The selected display mode
will flash on the lower middle as "M0", "M1" or "M2".
5.
The direction of the display can also be rotated 360 in 90 increments by pressing the
45
Advertisement
Table of Contents
