WT 3000 – Radio controlled bathroom clock
OVERVIEW
1-Signal
2-SET
3-RESET
4-▲
5-▼
LCD SCREEN DISPLAY
FEATURES
•
DCF-77 Radio controlled clock with manual setting option
12/24 h time display
•
•
Time zone setting (-1/+2 h)
•
Date and weekday display (8 languages)
•
Indoor temperature display in °C/°F
•
Humidity-proof, ideal for bathrooms
Mounting with 4 suction cups, wall mounting or table standing
•
GETTING STARTED
1. Twist and lift the back cover.
2. Remove the battery compartment cover.
3. Insert 1x AA battery matching the polarity (+/-).
4.
Close the battery cover and the back cover.
AUTOMATICALLY TIME SET
Once the battery is installed, the clock will begin searching for the DCF signal. Within 3-8 minutes the clock will receive the
DCF signal and set itself to the exact radio controlled time.
If a signal is not receivable, press the SIGNAL button, the clock will start to search again for the DCF signal.
MANUAL TIME SET
1.
Press and hold SIGNAL key for 2 seconds, the clock will stop receive the DCF signal.
2.
Press and hold SET key for 2 seconds to enter into time setting mode.
3.
The figure to be set will be flashing.
4.
Press ▲ or
to change the settings.
5.
Press SET key to confirm and go to next setting. The setting order is: 12/24-hr format, Hour, Minute Year, Month, Day,
Language.
6.
Press SET again to confirm and exit setting.
Instruction manual
Hanging hole
Suction cup
Table stand brackers
1
Need help?
Do you have a question about the WT 300 and is the answer not in the manual?
Questions and answers