Connecting The Hose; Operation; Vacuum Cleaner - Makita DVC350 Instruction Manual

Connecting the hose

CAUTION:
• Do not force the hose to bend it and/or
stamp it. Forcing and/or stamping the hose may
cause deformation or damage to the hose.
• Do not pull the hose to carry the cleaner.
Pulling the hose may cause deformation or
damage to the hose.
B
1
2
► 1 . Dust outlet 2. Power tool
Insert the "A" end of the hose to the suction opening
of the cleaner and turn it clockwise all the way until it
locks.
Attach the cuff on the "B" end of the hose and then
connect it to the dust outlet of an power tool.
Replacing the front cuff
Change the front cuff of the hose according to the dust
outlet size of a power tool you use.
1
2
► 1 . Front cuff 2. Hose 3. Remove 4. Install
To remove the front cuff, hold the hose and turn it
counterclockwise.
To mount the front cuff, turn it clockwise and then screw
it in until it stops.

OPERATION

WARNING:
•
•

Vacuum Cleaner

A
3
When using the cleaner as a portable cleaner,
cross-hanging the shoulder strap before the breast is
difficult to drop the cleaner.
4
9 ENGLISH
Do not use the shoulder strap when working in a
high place.
When using the cleaner as a stationary cleaner,
place it on a flat and stable surface.