Parts Description; For Blowing; Connecting The Hose - Makita XCV11Z Instruction Manual

PARTS DESCRIPTION

► 1. Tank cover 2. HEPA filter 3. Damper 4. Prefilter
5. Tank
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
CAUTION:
Always wear dust mask during
assembly or maintenance.

Connecting the hose

NOTICE:
Never force the hose for bending or
stamp it. Never move the cleaner by a hose.
Forcing, stamping and pulling the hose may cause a
breakage or deformation of the hose.
NOTICE:
Do not pick up large wastes such as
planer carvings and concrete pieces. It may cause
a hose stuffing and damage.
For vacuum cleaning
Insert the hose into the suction inlet and turn it clock-
wise until it clicks.
1
2
3
4
► 1. Suction inlet
5

For blowing

Insert the hose to blower outlet and turn it clockwise
until it clicks.
► 1. Blower outlet
NOTE: This cleaner has the suction inlet and blower
outlet separately. Connect the hose to the proper port
depending on your work.
8
1
1