Installing The Shoulder Strap - Makita DVC350 Instruction Manual

► 1 . Hook
At this time, make sure that the fastener part on the dust
bag faces upward.
NOTE:
• When the dust bag joint and the ring inside the
dust bag come off, install as follows.
(1) Align the dust bag joint with the seam of the
dust bag and install it so that its protrusion faces
upward.
► 1 . Protrusion
(2) Tighten the ring inside the dust bag firmly so
that the pins and the ring are positioned as shown
in the figure.
1
► 1 . Pins 2. Ring
1
1
► 1 . Shoulder strap 2. Two hooks
Attach one end hook of the shoulder strap onto the ring
in the front of the cleaner and thrust the other end of the
strap through the band of the dust bag and then attach
the other end hook as shown in the figure.
2
► 1 . Pull out 2. For shortening 3. For extending
To adjust the length of the shoulder strap, pull it out to
your desired length and pull the strap in the direction of
arrow as shown in the figure.
8 ENGLISH

Installing the shoulder strap

1
Adjusting the shoulder strap
1
3
2
2