Connecting The Hose; Storage Of Accessories; Maintenance - Makita DVC860L Instruction Manual

Connecting the hose

CAUTION:
• Never force the hose for bending or stamp it.
Never move the cleaner by a hose. Forcing,
stamping and pulling the hose may cause a
breakage or deformation of the hose.
• When picking up large wastes such as planer
carvings, concrete dusts or similar other than
small wastes, use the 38 mm inner diameter
hose (optional accessory). Using the 28 mm
inner diameter hose (optional accessory) may
cause a hose stuffing and damage.
Insert the hose onto the mounting port of the tank and
turn it clockwise until it locks.

MAINTENANCE

CAUTION:
• Always be sure that the tool is switched off,
unplugged, and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
Storage of power supply cord
You can wind up the power supply cord around the tool
box.

Storage of accessories

The pipes can be placed into the pipe holder when not
using the cleaner for a short time.
The hose can be stored around the tool by connecting
each ends.
14 ENGLISH