Interrupt Statistics; Orientation Detection - Altana BYK wave-scan 3 Operating Instructions Manual

Hide thumbs Also See for BYK wave-scan 3:

Table of Contents

BYK-Gardner GmbH

301 200 085 E 2008

8.1.5 Interrupt Statistics

If this option is activated, the corresponding entry appears in the context

menu during measurements.

By selecting this entry during measurements you can interrupt the measure-

ments on a sample before reaching the number of measurements set in the

statistics.

If activated the instrument automatically detects the current orientation of

the device – vertical or horizontal – during the measurements.

The result of the detection is shown in the measurement screen. You can

also alter the orientation manually by selecting Vert or Hor.

wave-scan 3 / wave-scan 3 dual

Configuration | 8

Table of Contents

Do you have a question about the BYK wave-scan 3 and is the answer not in the manual?

Byk wave-scan 3 dual 7403 7400