Optimizing The Energy Consumption - Gram COMPACT 220 Service Manual

To ensure that users, surroundings and stored items are not injured/damaged if the cabinets
tilts, these brackets must be mounted.
The cabinet can be installed freestanding, against a wall or COMPACT 220 can be built under a
worktop.
The cabinet must have sufficient ventilation and free air circulation beneath, above and behind the
cabinet. There must be a minimum clearance of 30 mm above the cabinet, and 20 mm at the
sides.
A
Fig. 5

Optimizing the energy consumption


Correct set up gives the most effective operation.

The product should be located in a dry and adequately ventilated room.

To ensure efficient operation, it may not be placed in direct sunlight or against heat-emitting
surfaces. The product is designed to operate in an ambient temperature between +16C
and +30°C.

Do not keep the door open for too long.

Do not set the temperature setpoint too low.

The product should be placed as close as possible up against the wall.
B
7