Advertisement
– insert BiDi-WiFi into the IBT4N connector (B) of the control unit
("Figure 5")
5
a
Caution! If BiDi-WiFi is inserted incorrectly, it may
permanently damage the control unit!
– power the automation's control unit ("Figure 6")
6
ON
– Wait for the Data Connection LED (A) to start flashing ("Figure
7")
– configure BiDi-WiFi through smartphone application MyNice
Pro, following the instructions contained in the relevant instruc-
tion manual that can be downloaded from this "link".
– the configuration is complete when Data Connection LED (A) is
fixed green ("Figure 7").
7
A
4 – ENGLISH
4
4
In the event of BiDi-WiFimalfunctions, the LEDs(A) and (D) can
B
light up or start flashing. ("Figure 8").
8
The "Table 1" shows the meanings of the LED signals.
LED SIGNALS
Status
Data
Connection
LED (A)
OFF
Lit green
Lit orange
Flashing
green
OFF
Flashing
orange
-
Lit red
Flashing red
LED SIGNALS
LED SIGNALS
A
Status
State duration Description
Power LED (D)
OFF
Fixed
Lit green
Fixed
Lit green
Fixed
Lit green
Fixed
Lit green
Fixed
Transitory
Flashing
(about 1
orange
minute)
Lit red
Fixed
-
Fixed
-
Fixed
D
Table 1
BiDi-WiFi off.
BiDi-WiFi
configured and
smartphone
connected.
BiDi-WiFi
configured but
smartphone not
connected.
BiDi-WiFi is
not configured.
Use smartphone
application to
perform the
accessory
configuration.
BiDi-WiFi was
not configured
within 30 minutes
of switching on.
Switch off and
on the accessory
to retry the
configuration.
BiDi-WiFi update
in progress.
System error.
Contact the
Nice Technical
Assistance.
Wi-Fi module
error. Contact the
Nice Technical
Assistance.
Configuration
error. Contact the
Nice Technical
Assistance.
Advertisement
